IN8P-W Turf-Tec Heavy Duty Tall Infiltration Rings with ports

6" and 12" Diameter by 7" Tall
Double Ring Infiltrometer

Click here to see out other infiltration devices

IN8P-W Shown with optional IN12-W Mariotte Tubes

The Turf-Tec Heavy Duty Tall Infiltration Rings have a 6 inch inner ring and a 12 inch outer ring with a 7 inch height. A gripped rubber handle is welded across the rings to keep them concentric and allow easy insertion into, and removal from the soil. These rings are ideal for rocky or hard soil types.

IN8P-W Shown with optional IN6-W Driving Plate

The new Turf-Tec Heavy Duty Tall Infiltration Rings allow the field infiltration rates to be measured. This tool conforms to the 2006 Pennsylvania Stormwater Best Management Practices Manual.

The Turf-Tec Heavy Duty Tall Infiltration Rings have a 6" inner ring and a 12" outer ring with a 7" height. A gripped rubber handle is welded across the rings to keep them concentric and allow easy insertion into, and removal from the soil. These Infiltration Rings are constructed of heavy duty 16 Gauge (.065 inch) Galvanized Steel to prevent rust and ensure a long life.

Determine soil infiltration rate in a little as fifteen minutes*

Now, for the first time, a field instrument to measure the rate of water infiltration on all areas. This instrument determines the downward flow of water through the soil. Rings come complete with two ports to attach optional Mariotte Tubes (IN12-W). These rings are ideal for hard soil types. The rings are centered by the welded handle on the top of the unit; this ensures the rings stay in place while driving them into the soil. The double ring ensures accuracy.

* 15 minute test is after soil reaches saturation

The new Turf-Tec Heavy Duty Tall Infiltration Rings conform to the new 2006 Pennsylvania Department of Environmental Protection (DEP) recommendations for testing storm water or soil evaluation and for Infiltration BMP's Design Guidelines.
BMP Manual Appendix C
See Appendix C - Protocols for Structural BMP's

Check Infiltration on

Soil Evaluation Retention Ponds
Wetlands
Drain Fields
Forestry
Site Planning
Storm Water Recharge Areas
Golf Courses
Sports Fields
New Construction

Specifications

6" and 12" Rings (15.24 cm X 30.48 cm)
Height of 7" (17.78 cm)
Sturdy Construction
Rust Proof Galvanized Metal 16 Gauge (.060")
Double Ring
Rings are welded into place to insure proper placement
Economical
Easy to Use - Unit has 1/2" ports added for IN12-W Mariotte Tubes to be attached (IN12-W sold separately)
Weight Approximately 11 lbs.

Photo showing IN8P-W Turf-Tec Heavy Duty Tall Infiltration Rings - 6 and 12 inch diameter by 7 inches tall with ports for optional Mariotte Tubes

Photo showing IN8P-W Turf-Tec Heavy Duty Tall Infiltration Rings - 6" and 12" Diameter by 7" Tall with ports for optional Mariotte Tubes - Ports are located 3" from bottom of rings allowing for 3" insertion into the soil and 5" of water on top.

IN8P-W - Turf-Tec Heavy Duty Tall Infiltration Rings
6" and 12" Diameter by 7" Tall with Ports for Optional Mariotte Tubes