IN16-W Heavy Duty 12" Diameter Infiltration Ring
Click here to see our other infiltration devices!

IN16-W - Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring. The new Turf-Tec Heavy Duty 12 Inch Diameter is a single ring Infiltration Ring has a diameters of 12 Inches (30 CM) and an overall height of 20 inches (50 CM).

The new Turf-Tec Heavy Duty 12" Diameter is a single ring Infiltration Ring has a diameter of 12" (30 cm) and an overall height of 20" (50 cm).

This single ring Infiltrometer is constructed of very heavy duty and durable galvanized steel and topped with a 1/4" thick steel reinforced top edge for driving into the soil.

The Turf-Tec Heavy Duty 12" Diameter Infiltration Ring is ideal for infiltration testing areas that do not need a double ring infiltration test. You can set this ring on the area to be tested, place the optional 1/2" thick steel driving plate (IN17-W) on top and drive the ring into the soil. The ring can be filled with water and then the infiltration rate can be determined by timing the amount of time it takes the water to go into the soil.

Turf-Tec Heavy Duty 12" Diameter Infiltration Ring comes with brass port located 7" above the base for the attachment of optional IN12A-W Mariotte Tube. This will allow you to maintain a constant head of water in the ring during testing without the need for personnel to continually fill ring while testing is being conducted. The Mariotte Tube are also helpful for periods of prolonged or overnight testing.

urf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring comes complete with inside welded steel brace for ease of extraction from soil. This single ring Infiltrometer is constructed of very heavy duty and durable galvanized steel and topped with a 1/4" thick steel reinforced top edge for driving into the soil.

Turf-Tec Heavy Duty 12" Diameter Infiltration Ring
comes complete with inside welded steel brace for
ease of extraction from soil

_______________________________________________________________

This method of testing is useful for field measurement of the infiltration rates where a Double Ring Infiltrometer is not necessary to fulfill local or state infiltration test standards.

The simple design coupled with strong construction and a port already installed makes the addition of the optional Mariotte Tube simple and seamless.

Click on image for FREE Turf-Tec Heavy Duty 12" Diameter Infiltration Rings Excel Spreadsheet for easy data recording.

Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring shown here with optional driving plate (IN17-W) and optional 10,000 ml Mariotte Tube (IN12A-W)
Turf-Tec Heavy Duty 12" Diameter Infiltration Ring
shown here with optional driving plate (IN17-W) and
optional 10,000 ml Mariotte Tube (IN12A-W)

Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring shown here with optional 10,000 ml Mariotte Tube with site glass are also available and highly recommended to maintain constant head pressure (IN12A) Purchased separately

A 10,000 ml Mariotte Tube with site glass are also
available and highly recommended to maintain constant head
pressure (IN12A) sold separately

See IN12-W – Turf-Tec Mariotte Tubes

Specifications:

Infiltration Ring is 12 inches in diameter (30 cm)
Overall height of 20 inches (50 cm)
Weight is 35 lbs (15.6 kg)
Rust resistant galvanized steel is 11 Gauge (1/8 inch thick .125 inch thick)
Inside welded steel brace for ease of removal from test area
1/4 inch steel reinforcing band on to top edge

Ring comes with brass port located 7 inches above the base for the attachment of optional IN12-W Mariotte Tubes

Entire ring comes fully assembled and ready to use right out of the box

See also the IN11-W Driving plates for the 12" and 24" Infiltration Rings

See also the New Turf-Tec Mariotte Tubes (IN12-W)
to allow you to maintain a constant head pressure

See also our new Large Volume Turf-Tec Mariotte Tubes
(IN13-W) to allow a constant head pressure to be
maintained over a longer test period