Precision Putting Green Digital Firmness Meter - GFM-01-S
> | ||
Precision Putting Green Firmness Compaction Meter has a digital depth meter for measuring the depression made in the putting surface after you drop the large bearing | To use the Precision Putting Green Firmness Compaction Meter, first zero out the digital depth measuring gauge by depressing the center measuring arm and then zero out the meter | Next, put the six foot measuring chain of the Precision Putting Green Firmness Compaction Meter on your ring or middle finger and extend your are so the tip of the measuring chain's weight lightly touches the putting green's surface |
Next, hold the bearing ball in the same hand as the measuring chain on the Precision Putting Green Firmness Compaction Meter, drop it from six feet. Note the ball should be level with the top of the ring at release | Center the washer from the Precision Putting Green Firmness Compaction Meter on top of the depression. Note that a small imperfection in the turf canopy can be used to align the washer directly over the middle of the depression | Take the Digital depth meter on the Precision Putting Green Firmness Compaction Meter and place it on top of the washer and let it rest on the washer to measure the depression created by the steel ball |
On this putting green, the Precision Putting Green Firmness Compaction Meter shows the depression at 0.3405 inches deep and that is an indication of the putting greens surface firmness | Once you remove the meter and the washer of the Precision Putting Green Firmness Compaction Meter, you use the ball mark tool to fix the indentation in the green | This will give you the firmness measurement on the putting green with the Precision Putting Green Firmness Compaction Meter. This process should be repeated for each green on the course |
1471 Capital Circle NW, Suite # 13
Tallahassee, FL 32303
Order Line (800) 258-7477
Phone (850) 580-4026
Fax (850) 580-4027
Copyright 2021