Turf-Tec International, Tallahassee, Florida. USA (850) 580-4026This product is made by Turf-Tec International in the USA

ASTM 3385 Double Ring Infiltrometer
IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch Diameters
ASTM Infiltration Rings for ASTM 3385

Click here to see our other infiltration devices!

The new Turf-Tec Heavy Duty Infiltration Rings have diameters of 12 and 24 Inches (60 CM and 30 CM) and an overall height of 20 inches (50 CM) that match ASTM Standard D 3385-03 which replaced old ASTM D 3385-94.

The new Turf-Tec Heavy Duty Infiltration Rings have diameters of 12 and 24 Inches (60 CM and 30 CM) and an overall height of 20 inches (50 CM) that match ASTM Standard D 3385-03 which replaced old ASTM D 3385-94.

The Turf-Tec Infiltration Rings are double rings for standard testing of soils with a hydraulic conductivity between 1X10-2 cm/s or less than about 1 X 10-6 cm/s or sand type soils with high infiltration rates.

This Double Ring Infiltrometer set is constructed of heavy duty and durable galvanized steel and braced with welded steel supports inside and out to insure the rings stay evenly centered as they penetrate the soil. The heavy duty set also has a 1/4 inch thick steel welded on top edge to allow aggressive driving into hard soils.

Turf-Tec 12 and 24 inch infiltration rings are already centered in position for ease of positioning rings and ease of insertion into the soil. The welded handle and welded inside support braces insure the rings are perfectly centered with every test. In addition, the center ring is already suspended one inch above the outer ring to identically match the ASTM specifications and to insure exact soil placement.

 

This method of testing is useful for field measurement of the infiltration rate of soils. Infiltration rates have applications in the field of liquid waste disposal, evaluation of potential septic tank disposal fields, leaching studies and drainage efficiencies. They are also helpful in determining irrigation requirements, water spreading or recharge, canal leakage and reservoir leakage testing and studies.

The Turf-Tec 12 and 24 inch ASTM Infiltration Rings are useful in industries like geology, geotechnical, engineering, hydrology, forestry, environmental testing, hydrogeological, runoff studies, wetland mitigation, permeability testing, sanitation contractors, project planning and EPA requirements.The purpose of the double ring is to insure the downward flow of movement of water to insure proper measurements. These infiltration rings are ideal for taking ASTM infiltration tests on all areas and match the ASTM 3385 test.

The Turf-Tec 12 and 24 inch ASTM Infiltration Rings are useful in industries like geology, geotechnical, engineering, hydrology, forestry, environmental testing, hydro geological, runoff studies, rain gardens, wetland mitigation, permeability testing, sanitation contractors, project planning, Professional Engineers (P.E.) and EPA requirements. Double ring Infiltrometer, standard set.
set.

Turf-Tec Infiltration Rings 12 and 24 inch come with Excel Spreadsheet for easy data recording.

Infiltration Rings 12 and 24 inch come with Excel Spreadsheet for easy data recording.  Link!

Turf-Tec 12 and 24 inch infiltration rings are already centered in position for ease of positioning rings and ease of insertion into the soil. The welded handle and welded inside support braces insure the rings are perfectly centered with every test. In addition, the center ring is already suspended one inch above the outer ring to identically match the ASTM specifications and to insure exact soil placement.

IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch Diameters ASTM Infiltration Rings for ASTM 3385

Turf-Tec Mariotte Tubes are also available and highly recommended to maintain constant head pressure (IN12 Purchased separately)

Mariotte Tubes are also available and highly recommended to maintain constant head pressure (IN12 Purchased separately)

See IN12-W Turf-Tec Mariotte Tubes

Specifications:

Inner ring is 12 Inches Diameter (30 CM)
Outer Ring is 24 Inch Diameter (60 CM)
Overall height of 20 inches (50 CM)
Unit weight 70 lbs(32 kg)
Sturdy construction - Rings are welded into place to insure proper placement
Inner ring is suspended one inch above outer ring to match ASTM 3385 Specifications
Rust resistant galvanized steel is 14 Gauge (.10 inch thick)
Top welded steel braced handles for ease of insertion and removal from test area
Four 1/4 inch steel reinforcing braces insure center ring and outer ring stay in alignment during testing
Rings come with brass ports for the attachment of optional IN12-W Mariotte Tubes
Entire ring comes fully assembled and ready to use right out of the box

 

Also see the IN11-W Driving plates for the 12 and 24 Inch Infiltration rings.

Also see the IN11-W Driving plates for the 12 and 24 Inch Infiltration rings

Also see the New Turf-Tec Mariotte Tubes (IN12-W) to allow you to maintain a constant head pressure.

..also see the New Turf-Tec Mariotte Tubes (IN12-W) to allow you to maintain a constant head pressure

... also see our new Large Volume Turf-Tec Mariotte Tubes (IN13-W) to allow a constant head pressure to be maintained over a longer test period.

... also see our new Large Volume Turf-Tec Mariotte Tubes (IN13-W) to allow a constant head pressure to be maintained over a longer test period

 


IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch Diameters ASTM Infiltration Rings for ASTM 3385

Click here to see this item in the on-line catalog

Click here to order this product


Turf-Tec offers many different ways of performing infiltration tests.
See our other infiltration devices:

IN2-W Turf-Tec Infiltrometer. Turf-Tec Infiltrometer - A device for measuring infiltration rates directly on the turfgrass area. IN11-W - Turf-Tec Driving Plates for
Turf-Tec 12 and 24 inch Infiltration Rings
IN11-W - Turf-Tec Driving Plates for Turf-Tec 12 and 24 inch Infiltration Rings
IN7-W Turf-Tec 6 and 12 inch Heavy Duty Infiltration Rings. Infiltration Rings Heavy Duty - A diagnostic tool for measuring infiltration rates of hard soils 6 inch and 12 inch diameter. IN12-W Turf-Tec Mariotte Tubes for IN10-W 12 & 24 Inch Rings for ASTM 3385. Mariotte Tubes for Infiltration rings 12 & 24 Inch - Keeps constant head of water for ASTM Standards.
IN8-W Turf-Tec Heavy Duty Tall Infiltration Rings (OR) - IN8P-W (with Port for Mariotte Tube) IN8-W  - Turf-Tec Heavy Duty Tall Infiltration Rings - The new Turf-Tec Heavy Duty Tall Infiltration Rings allow the field infiltration rates to be measured. This tool conforms to the new 2006 Pennsylvania Stormwater Best Management Practices Manual. IN13-W - Turf-Tec International Large Volume Mariotte Tubes IN13-W - Turf-Tec International Large Volume Mariotte Tubes
IN6-W Turf-Tec Driving Plate for IN5-W, IN7-W or IN8-W IN6-W - Turf-Tec Driving Plates for all Turf-Tec 6 and 12 inch Infiltration Rings - To aid in hammering or pressing the infiltration rings into the soil. IN15-W Turf-Tec 5 foot and 12 foot ASTM 5093 Infiltration Rings. Turf-Tec Infiltration Rings 5 & 12 feet diameter for ASTM 5093 Test
IN10-W Turf-Tec 12 inch and 24 inch ASTM 3385 Infiltration Rings.  Infiltration Rings 12 and 24 Inch - These infiltration rings match ASTM standards. IN16-W Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring IN16-W Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring
IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch Diameters ASTM Infiltration Rings for ASTM 3385 IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch Diameters ASTM Infiltration Rings for ASTM 3385 IN17-W Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring driving plate IN17-W Turf-Tec Heavy Duty 12 Inch Diameter Infiltration Ring driving plate

Free downloadable spreadsheet for ASTM 3385 Infiltration testing

Turf-Tec International

1471 Capital Circle NW, Suite # 13
Tallahassee, FL. 32303
Order Line (800) 258-7477
Phone (850) 580-4026
Fax (850) 580-4027

Click here to search Turf-Tec Intrenational Site

Home / Search Site / Catalog / Online Ordering / Map of site / Newsletter / On line consult / Contact us
History / Web Designs / Request Catalog / Search Engines

Copyright 2012 - Patent Pending