Now, you can easily and accurately measure your infill material on artificial turf with the Economy Infill Depth Gauge. This accurate depth gauge is useful in testing the new infill artificial turf surfaces to determine the depth of the infill rubber or rubber and sand topdressing on artificial turf sports fields. This device will also assure consistency from one area to another to insure the playing surface has uniform depths of infill material across the entire playing surface.

Instructions

1. Turn black knob to loosen depth gauge.
2. Place white foot plate firmly on infill surface
3. Slide center shaft down until it makes contact with carpet backing
4. Lift out and read gauge in inches or millimeters
5. Note, you should check 2 or 3 areas at each location to get the average infill for that test area.
6. Test wear areas more frequently as these areas are usually where the infill is dispersed more frequently.
   
   Also keep in mind that infill does not break down, it often is just re-distributed to other areas of the playing surface. By using Turf-Tec Economy Infill Depth Gauge for Artificial Turf Artificial Turf combined with proper grooming techniques and brushing, this will even out the infill better than just the addition of more infill or brushing and grooming alone. This will save time, money and labor and also produce better and safer playing surfaces.

Specifications

Economy Model Infill Depth Gauge - IDG2-M Measures from 0 to 6 inches or 0 to 15 cm High impact plastic and Stainless Steel probe Weight - 1.0 oz / 28g Size - 7 x 1.25 x 1.25 inch / 18 x 2.75 x 2.75 mm

The Turf-Tec Economy Infill Depth Gauge for Artificial Turf is excellent for football, baseball, softball, soccer, lacrosse, field hockey, cricket anyplace that infill, crumb rubber, crumb rubber and sand filled artificial or synthetic turf is used